MLCS Premium 3/4 Inch Flush Trim Router Bits with Top & Bottom Bearings Kit remove precise amounts of material from the edge of doors or very large panels, or whenever size makes it difficult to use a router table.

Features:

• By varying the bottom bearing diameter, you can accurately remove 1/16" or 1/8" in two passes.
• When using the bit, for the first pass adjust the bottom bearing to run at the bottom of your stock, removing the designated amount from the top of the stock.
• For the second pass, readjust the bit height to allow the top bearing to run along the previously cut top of your stock, completing the trimming operation.
• For stock up to 1-3/8" thick, or 2" thick.

Specifications:

• 3/4" Top and Bottom Bearing Flush Trim/Pattern Bit with two 3/4" OD bearings. 
• Large Diameter: 3/4".
• Cut Length: 2".
• Shank Size: 1/2".
• Two additional bearings 5/8" and 1/2" OD.
• Hex Key.