MLCS Slot Cutter Router Bits are 3 wing cutters that create shiplap joints, tongue and groove joints, T-moldings, rabbeting. Three wing carbide tipped with 8 mm (approximately 5/16") bore, and 1-7/8" large diameter. Cuts 1/2" deep when used with our arbor and bearing. To reduce depth of cut, use larger bearings. Use for cutting slots or kerfs.

Features:

• To determine the proper bearing, use the following formula:
• Bearing Outer Diameter = Large Diameter of Bit minus (2x Desired Cut Depth)

Specifications:

• Type: 5/16" Arbor and Bearing Set 1/2" Shank