DripFlo Irrigation 6850042 1/4 Inch x 50 Ft. Porous Drip Soaker Tubing is designed for slow, low-volume watering in raised beds, garden rows, borders, containers, and landscape planting areas. The porous tubing wall allows water to seep gradually along the run to help deliver moisture near the root zone. This tubing connects with compatible 1/4 inch barb fittings so it can be integrated into custom drip irrigation layouts. It is engineered to apply approximately 0.75 gallons of water per hour for every 15 feet at 25 PSI when used in a properly configured system. For best performance, install a filter and pressure regulator upstream of the tubing to help maintain steady low-volume water delivery. This soaker tubing is intended for outdoor irrigation use with cold water only.

Features:

• Delivers slow-release watering through a porous tubing wall that allows water to seep gradually along the irrigation run.
• Supports root-zone watering for raised beds, garden rows, borders, containers, and landscape planting areas.
• Connects with compatible 1/4 inch barb fittings for use in custom drip irrigation layouts.
• Applies approximately 0.75 gallons of water per hour for every 15 feet at 25 PSI when properly installed.
• Helps reduce runoff compared to overhead watering by applying water slowly near the soil surface.
• Performs best with a filter and pressure regulator installed upstream of the tubing.

Specifications:

• Connection Type: For use with 1/4 inch barb fittings
• Water Delivery: Porous wall design for slow-release root-zone watering
• Flow Rate: Approximately 0.75 gallons per hour for every 15 feet
• Recommended Operating Pressure: 25 PSI
• Recommended Setup: Use with a filter and pressure regulator upstream of the tubing